Canopy
The parachute cables need to rest in the right orientation in the cable storage box: The LED cabin lights were no part of my kit …
Build of a 4-seat kit plane with the Rotax 915 iS
The parachute cables need to rest in the right orientation in the cable storage box: The LED cabin lights were no part of my kit …
The rear fuselage documentation is fairly new, however there is still missing and wrong information in it. It’s a good idea to cross check the …
Brake Line Installation The PVC brake lines need a little “grease” to slide into the conduit of the gear legs and the in/outlets of the …
The firewall insulation/protection provided by the factory will melt when hit by flames. I decided to use something more durable from a race car supplier. …
Since the stock rudder pedals are not very appealing, I decided to make my own pedals. A model created with Scad printed on a 3D …
On the left wing I used another method. The rivet heads are being filled with two component epoxy resin mixed with “glass micro balls”. The …
Flap and aileron needed to be riveted while being mounted to the wing. The alignment was quite easy and I could rivet the leading edges …